Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revisionNext revision | Previous revision |
| a5:babystepping [2018/05/12 17:43] – samuelpinches | a5:babystepping [2020/12/25 02:13] (current) – external edit 127.0.0.1 |
|---|
| |
| === Babystepping with the LCD buttons === | === Babystepping with the LCD buttons === |
| A [[https://www.facebook.com/groups/857364187778691/permalink/911471142367995/|custom LCD firmware has been prepared by Karl Johnson on the A5/A3S printer facebook group]], which adds additional buttons to the LCD control panel. These buttons are accessible from the printing status page (only visible while you are printing from a USB memory stick via the LCD screen). **[[a5:lcd-firmware|You can download community LCD firmware for both the A5 and A3S printers from here]].** | A custom LCD firmware has been prepared by [[https://www.facebook.com/groups/857364187778691/permalink/911471142367995/|Karl Johnson on the A5/A3S printer facebook group]], which adds additional buttons to the LCD control panel. These buttons are accessible from the printing status page (only visible while you are printing from a USB memory stick via the LCD screen). **[[a5:lcd-firmware|You can download community LCD firmware for both the A5 and A3S printers from here]].** |
| |
| I have prepared a very quick video demonstrating this in action: | I have prepared a very quick video demonstrating this in action: |
| {{youtube>ceUIi4-c3qk?medium}} | {{youtube>ceUIi4-c3qk?medium}} |
| |
| | For information, babystepping via the LCD issues the command G91, then a G1 Z0.025 or G1 Z-0.025 and finally a G90. Therefore babysteps are of 0.025mm at a time. (G90 and G91 just change the positioning method, relative or absolute) |
| |
