Damping the Bowden extruder for noise reduction [The Unofficial JGMaker (& JGAurora) Wiki]

a5:damping-the-bowden-extruder-for-noise-reduction

This is an old revision of the document!

Damping the Bowden extruder for noise reduction

Author: AETEK

Difficulty: Beginner

What is this about?

Required Electrical Parts

1 x 2-Pin male plug for building a plug-in-adapter.
Some cable and heat shrink

The hobbyist will most likely have the parts in the tinker box

The cable tie comes into this gap.
aetek

This is the result.
aetek

a5/damping-the-bowden-extruder-for-noise-reduction.1530907085.txt.gz · Last modified: 2020/12/25 02:13 (external edit)